Fire Protection and Security: Working Together on Site

A uniformed security guard outside a commercial building at dusk

Fire protection and security have different roles, but they need to work to one clear plan. When your people understand what to do, who to contact and how to keep escape routes available, you can manage everyday site activity with greater confidence and respond more consistently if an alarm sounds.

This is a practical guide to joining up the two functions. It is not a substitute for a suitable fire risk assessment or advice from a competent fire safety professional.

Start with clear responsibilities

Fire safety arrangements should be based on the risks at your premises. In England and Wales, the Regulatory Reform (Fire Safety) Order 2005 places duties on the Responsible Person, commonly an employer, owner, occupier or another person with control of the premises. Where more than one organisation has duties, they may need to cooperate and coordinate. The government’s fire safety guidance explains these responsibilities.

A security contract can assign specific tasks, but it does not automatically transfer the client’s legal responsibilities. Your arrangements should make it clear which tasks belong to your organisation, which are assigned to a security provider and who is responsible for fire systems, maintenance and specialist advice. Fire safety legislation differs across the UK, so confirm which requirements apply to your premises.

Give security staff site-specific instructions

A guard can support your fire safety arrangements only when their role is understood and properly briefed. A site induction should explain the alarm procedure, evacuation routes, assembly point, escalation contacts and any duties assigned to the security team.

Depending on your risk assessment and agreed procedures, those duties might include raising concerns about blocked exits, following the alarm response plan, calling the fire and rescue service when instructed, directing people towards an assembly point or meeting emergency responders at an agreed location. Any task should be clear, suitable for the individual and covered by appropriate training.

Security staff should not be expected to enter smoke-filled areas, delay an evacuation to investigate an alarm or tackle a fire unless a suitable risk assessment, training and equipment specifically support that action. People’s safety comes first.

Agree what happens when an alarm sounds

An alarm response should be written down, shared with the relevant teams and understood by anyone who may be on duty. Avoid relying on informal assumptions, especially when your building has different procedures during occupied and unoccupied hours.

Your plan should settle practical questions such as:

  • Who raises the alarm and calls 999?
  • Is evacuation immediate, or does a documented procedure apply?
  • Who directs occupants and visitors to safety?
  • Who meets the fire and rescue service, and where?
  • Who provides site plans, keys or other agreed information?
  • Who records actions and reports the incident afterwards?

If a guard is expected to monitor an alarm panel or carry out a defined action, state who is authorised and trained to do it. The procedure should also cover escalation if the usual contact cannot be reached. Do not leave uncertainty over whether an alarm should be investigated before people leave.

Keep security arrangements compatible with escape

Access control protects your premises, but it must not obstruct evacuation. Consider how doors, turnstiles, gates, shutters and electronically controlled exits behave during an alarm, a power failure or a system fault. Make sure the release method is understood and that authorised people know what to do.

Security instructions should reinforce the fire plan. During an evacuation, identity checks or normal entry rules must not delay people leaving. Once occupants have evacuated, arrangements can cover preventing unauthorised entry and keeping access clear for emergency responders, without compromising escape.

Fire doors and escape routes also need regular attention. Agree who checks them, how often checks take place and how faults are reported and followed up. A security officer may be asked to note an obstruction or visible defect during their duties, but this should not be confused with specialist inspection or maintenance.

Use routine checks and reporting to spot issues

Everyday site routines can help identify issues before they become harder to manage. Where included in the brief, security staff can report concerns such as stored items narrowing an escape route, blocked access to fire equipment or a door that does not appear to close correctly.

Agree a straightforward reporting route. Decide who receives the report, how urgent issues are escalated and who arranges remedial work. Keep records of reported defects and actions so that open items are not lost between shifts or teams. The person responsible for the premises should ensure that required fire safety systems and equipment are maintained by the appropriate competent provider.

A useful report gives enough information to act: the location, what was observed, when it was noticed and whether anyone was informed at the time. This supports follow-up without asking security staff to make technical judgements outside their role.

Plan for people, visitors and contractors

Your fire arrangements should account for everyone who may be on site, not only permanent employees. This includes visitors, delivery drivers, contractors and people who may need assistance to evacuate. Make sure reception, security and facilities teams know how to direct visitors and where to find the current instructions.

Where individual evacuation arrangements are needed, agree how relevant information is shared with the appropriate people while respecting privacy. Security staff should know what their role is, but should not be expected to improvise assistance without clear instructions.

Consider how the plan works across different shifts and changes in occupancy. If a building is partly occupied, has lone workers or operates outside normal hours, confirm who is present, how an alarm is raised and how the site’s procedure applies at that time.

Build one coordinated site plan

A joined-up plan is most effective when it reflects how your premises actually operate. Work through the arrangements with the Responsible Person, facilities team, security provider and any other relevant contractors. Record responsibilities, contacts and escalation steps in a format people can use.

A security officer and site representative reviewing instructions together

Before the service starts, confirm:

  • Site information: Current evacuation instructions, assembly points and access arrangements.
  • Assigned duties: Specific security tasks, limits of responsibility and required training.
  • Alarm procedure: Actions for staffed and unstaffed periods, including how to summon the fire and rescue service.
  • Access arrangements: How exits release and who can operate agreed overrides.
  • Reporting and handover: How faults, incidents and outstanding actions are recorded and passed on.
  • Review points: When to revisit the plan, such as after a layout change, an incident or a change in how the site is used.

Review the arrangements with the people who use them. A short briefing or exercise can reveal unclear instructions before they matter. Update the plan when roles, equipment, occupancy or site layout changes.

Tailor the service to your premises

The right level of support depends on your site, operating hours, existing procedures and the responsibilities you need help managing. For facilities management companies across the UK, coordinating contractors and keeping information current can be an important part of maintaining consistent arrangements across buildings.

Weston Group works with clients to provide security and fire protection support shaped around individual site requirements. Our fire protection service can sit alongside manned guarding, with agreed checks, clear reporting and procedures suited to your premises. Local teams provide national coverage across the UK.

If you are reviewing your current arrangements or planning cover for a new site, you are welcome to contact us through the quote form. We can discuss your requirements and help you identify a practical next step.